Taken the day we moved in.
Electrics need work
As Mill House is very old, and has been added to and extended over the years the electrics leave a lot to be desired. The plan is to re-wire as we go to make sure everything is safe and up-to spec.
Front room Fireplace
Removed the fireplace surround to reveal the original oak lintel.
Removing the airing cupboard
Removing the airing cupboard to make one of the bedrooms a better size. The boiler and water tank will be located in the boot room.
Airing cupboard removed
Now the airing cupboard is removed, the plan is to put in a little set of steps for access into the bedroom (The other door not pictured will be removed).
This is the kids bathroom prior to being ripped out.
The sink and vanity unit have just been removed, next-up for removal is the bath…
Reconfiguring the layout of the master bedroom to create an en-suite.
"The Snug" being stripped out…
It’s got to get worse before it gets better, right?
Rewiring started in April
Rewiring the house is well under way. As well as running ethernet cable to most rooms we’re also running speaker cable to both bathrooms, the master bedroom, kitchen, landing, and the lounge.
It’s all starting to come back together now…
New panelling is up on the back wall and looking nice, just need to decide on paint colours now.
Front room progress
Front room plastering in progress